Three-Disc Magnetic Separator Operating instruction manual
Usage
This machine is a dry high magnetic separator, mainly used for titanium, tin, and wolframite.
Technical Characteristic
1 .Capacity: 120-800kg/h
Z.Magnetic Field Intensity: 18000 Gauss
3. Raw Material Size:<2mm
4.Magnetic Pan Diameter:600mm
5. Magnetic Pan Qty:3 piece
6. Power Supply:380v
7.Motor Power:2.2kw
8. Direct-current Power:3KVA
9. Magnetic Pan Rotary Speed:36r/min
10. Feeding Width:600mm
11.Dimension:3100*770*1200mm
12.Weight:2100kg
Feature
1.Stable,well-adapted,easy-operating.
2.1t is consisted of the feeding part, conveying part, and magnetic part.
3. Electronic control system consists of power, control, composition rectification, and work instructions section.
Installation
1. Check the motor regularly.
2. Put the equipment aclinic.
3. Put the electronic system in a place easy to observe.
4. Connect to the ground electrode
5. Knife switch connects 25-ampere fuse, the black wire connects to null line, connect the same serial number wire between main equipment and controlling parts.
Operating
1 . After screening the dry material, feed to the hopper, size <2mm.
2. Adjust the space of the magnetic disc according to different ore.
3. Supply power to console by switching
3. Start motor and magnetic switch.
4. Start feeding valve, feeding the material to the conveyor belt.
5. Stop feeding before shutting down the machine.
Maintenance
1 . Notice if there is an unnormal sound, vibrating, heat.
l.Check and add lubricant9add oil to turbine volute every three months.
3. Keep the wire clean, dry.
Trouble Shooting
1 . Stock bin
2. Worm-gear case
3. Motor
4.BeIt pulley
5. Conveying belt
6. Vibrating feeder
7. Magnetic disc
8. Discharging part
9. Magnet exciting coil
